| Customization: | Available |
|---|---|
| After-sales Service: | Yes |
| Type: | Pellet Mill |
|
Still deciding? Get samples of US$ 1380/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Industrial Feed Mixer Crusher Machine Corn Grinding Equipment Soybeans Pulverizer
Device installation of Feed Mixer Crusher Machine
1. First choose the appropriate place to stabilize the machine and dig the pit
2. Install the motor of the mixer
3. Install the suction tube, and place the return air tube on the suction tube. The lower side of the return air tube is 1 cm lower than the suction tube. If the bottom of the crusher is less 4 mm , the bottom of the return duct should be 3 cm smaller than the bottom of the pit.
4. Install a dust bag and fasten the bag
| Item | Specification |
| 500 KG mixer |
1. Model 500 feed unit 2. Size: 170*130*315cm 3. Installed capacity: Crushing B35.2 grade:7.5 kW; mixer ordinary 4 grade: 2.2 kW 4. Bearing: 1 set 7208; 1 set UCF208; 4 sets 205 5. Oil seal: 2 sets50*72*12, 4 sets 25*52*10 6.Triangle belt: 2 pieces A1500, 2 pieces A650
|
| 1000 KG mixer |
1. Model 1000 feed unit: 2. Size: 210*150*360cm 3. Installed Capacity: Crushing B35.2 grade: 7.5KW; mixer ordinary 4 grade: 2.2KW 4. Bearing: 1 set 7208; 1 set UCF208; 2 sets 205 5. Oil seal: 2 sets 50*72*12; 4 sets25*52*10 6. Triangle belt: 2 pieces A1700; 2 pieces A650 |
Operation and adjustment
In the range of 380±15V, the raw material moisture under the condition of 13-15%, it can be operated according to the following procedures
1. Empty machine commissioning:
Turn on the power, start the crusher and the mixer, and observe the mixer's hinged steering. If the hinged steering is opposite to the mixer's sign indicating steering, the thread ends should be reversed. When the crusher is reversing and there is no abnormal noise, the display unit works normally and can be shut down for production preparation.
2. Weigh each raw material separately according to the formula and batch (500-1000 kg each time)
3. Start the crusher. After the operation is balanced, gradually pour the raw materials into the material pit (do not mix the metal products into the raw materials). After the raw materials are crushed, turn off the crusher power.
4. After starting the mixer, add the uncrushed raw materials and feed additives to the hopper (do not add the sacks, ropes, etc.), the mixer works for 10-15 minutes, then stop the crusher. In half, start the mixer to speed up the output of feeds.
Unit now, the first work cycle has been completed, and then proceed to the next work cycle as described above.
Adjustment of Feeds Processing Crusher Mixer Machine
1. The thickness of the feed can be adjusted by changing the sieve with different pore sizes.
2. Adjustment of material intake
The adjustment method is to move the suction nozzle outer cylinder up and down. The distance from the suction nozzle to the pit should be 4-4.5 cm (the diameter of the bottom of the pit should not be less than 20 cm). If entering the crusher feeds is pellets or powder, the nozzle outer cylinder should be moved downwards, and the distance from the bottom edge to the sump should be about 3 cm. If entering the crusher is the raw material of the cullet, the outer cylinder of the nozzle is lifted but cannot be higher than the height of the inner feeding tube
3. The tension of the mixer's triangle-belt is adjusted by moving the motor
Maintenance of Feed Mixer Crusher Machine
1. Fill the mixer bearings with butter every one month of operation
2. After the work of the filter bag, the adhered dust should be beaten once a week, and cleaned once a week to ensure ventilation.
3. Hammer is one of the wearing parts. After working for a period of time, the corners will wear and the productivity will drop. At this time, the crusher can be rotated in the opposite direction to use the other corner. When both ends are worn, the hammer can be turned over and the other two corners are used. If the four corners are worn, the new hammer must be replaced. When replacing the new hammer, pay attention to the weight of each set of hammers. Otherwise, it may cause the crushing disc to be biased to vibrate.
4. Please replace the hammer in time when the sieve is severely worn.
){kind=link}