Stc-1000 Intelligent Digital Display Temperature Controller Refrigerator Cabinet Temperature Control

• Customization: Available
• Customized: Non-Customized
• Certification: CE
• Model NO.: digital thermostat
• Display Type: LED
• Product: Temperature Controller
• Control Type: Temperature
• Temperature Range: -50-99 Degree
• Temperature Measurement Error: 0.1 Degree
• Hole Size: 71*29 (mm)
• Output Signal: 10000mA
• Operating Voltage: 110-220V
• Net Weight: 120g
• Gross Weight: 140g
• Transport Package: PP Plastic
• Specification: Temperature Controller
• Trademark: Thermostat stc-1000
• Origin: China
• HS Code: 84362100
• Production Capacity: 50000 Sets/Month
• Package Size: 20.00cm * 20.00cm * 15.00cm
• Package Gross Weight: 0.140kg

Product Description

Product Description

STC-1000 Intelligent Digital Display Temperature Controller Refrigerator Cabinet Temperature Control

Specification of Temperature Controller

Products	Thermostat stc-1000
Power supply	110-220VAC ± 10%, 50/60Hz (or DC12V / DC24V)
Measuring and controlling temperature range	-50ºC~+110ºC
Resolution	0.1

Key operation instructions of Temperature Controller
1. View parameter method
When the controller is working normally, press and immediately release the up key once to display the temperature set value; press
And immediately release the down button once to display the temperature difference setting value. Return to normal temperature display state after 2 seconds

2. Setting parameters
When the controller is working normally, press and hold the "S" key for more than 3 seconds to enter the parameter modification mode, the "Set" indicator light is on, and the digital tube displays the first
The code "F1" of each menu item can be adjusted up or down by pressing the up or down key, and the parameter setting value of the current menu will be displayed by pressing the "S" key.
Press and hold the "S" key, and then press the up or down key to adjust up or down and display the parameter setting value of the current menu, while holding down the "S" or up
Or down key can quickly adjust up or down and display the parameter setting value of the current menu. After setting, press and release the power switch key to save the parameter
Modify and return to the normal display state. If there is no key operation within 10 seconds, the parameter modification will not be saved and return to the normal display state.
If there is an error while saving the parameters, it will display "Er", and return to the normal display state after 3 seconds.

3. Repair system data
When the machine is powered on, first check whether the parameter settings are correct. If an error is detected, it will display "Er", and press any key at this time to restore the default





 STC-1000 Intelligent Digital Display Temperature Controller Refrigerator Cabinet Temperature Control