Digital Display Temperature and Humidity Controller Breeding Incubation Thermostat Stc3028

• Customized: Non-Customized
• Certification: CE
• Display Type: LED
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: STC3028
• Product: Breeding Incubation Thermostat Stc3028
• Control Type: Temperature
• Temperature Range: -50-99 Degree
• Temperature Measurement Error: 0.1 Degree
• Hole Size: 71*29 (mm)
• Output Signal: 10000mA
• Operating Voltage: 110-220V
• Net Weight: 120g
• Gross Weight: 140g
• Transport Package: PP Plastic
• Specification: Temperature Controller
• Trademark: Thermostat stc-3028
• Origin: China
• HS Code: 84362100
• Production Capacity: 50000 Sets/Month
• Package Size: 10.00cm * 5.00cm * 1.00cm
• Package Gross Weight: 0.140kg

Product Description

Product Description

Digital Display Temperature and Humidity Controller Breeding Incubation Thermostat STC3028

Specification of Breeding Incubation Thermostat STC3028

Products	Thermostat stc-3028
Temperature Measuring range	-20 ~ 80ºC
Humidity measuring range	0 ~ 100%RH
Voltage	12V/24V/110-220V

Key operation instructions of Breeding Incubation Thermostat STC3028
1. View parameter method
When the controller is working normally, press and immediately release the up key once to display the temperature set value; press
And immediately release the down button once to display the temperature difference setting value. Return to normal temperature display state after 2 seconds

2. Setting parameters
When the controller is working normally, press and hold the "S" key for more than 3 seconds to enter the parameter modification mode, the "Set" indicator light is on, and the digital tube displays the first
The code "F1" of each menu item can be adjusted up or down by pressing the up or down key, and the parameter setting value of the current menu will be displayed by pressing the "S" key.
Press and hold the "S" key, and then press the up or down key to adjust up or down and display the parameter setting value of the current menu, while holding down the "S" or up
Or down key can quickly adjust up or down and display the parameter setting value of the current menu. After setting, press and release the power switch key to save the parameter
Modify and return to the normal display state. If there is no key operation within 10 seconds, the parameter modification will not be saved and return to the normal display state.
If there is an error while saving the parameters, it will display "Er", and return to the normal display state after 3 seconds.

3. Repair system data
When the machine is powered on, first check whether the parameter settings are correct. If an error is detected, it will display "Er", and press any key at this time to restore the default


Digital Display Temperature and Humidity Controller Breeding Incubation Thermostat STC3028